RailNET Full System Documentation Packet (2024): Difference between revisions
No edit summary |
Formatting, added direct links to the additional drawings in that section |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
<p> | <p> | ||
The following articles | The following articles are provided in the documentation packet provided with new RailNET systems in 2024. | ||
</p> | </p> | ||
=== Procedures and Bulletins === | |||
[[LX-800 Battery Notice]] | * [[LPMTX Battery Notice]] | ||
* [[LX-800 Battery Notice]] | |||
[[LX-800 With LXCOM Battery Notice]] | * [[LX-800 With LXCOM Battery Notice]] | ||
* [[LXCOM Upgrade Battery Notice]] | |||
[[LXCOM Upgrade Battery Notice]] | * [[APU-102 Pentium Upgrade Quick Reference]] | ||
* [[UART Chip Replacement on COM4 and COM4A Boards]] | |||
[[APU-102 Pentium Upgrade Quick Reference]] | * [[Upgrade Procedure for APU102E Series (486) to APU102PGN]] | ||
* [[APU102PGN Reversion Procedures Back to APU102E Series (486)]] | |||
[[UART Chip Replacement on COM4 and COM4A Boards]] | * [[Upgrade Procedures for APU102PG (Pentium) to APU102PGN (Network)]] | ||
* [[Reversion Procedures for APU102PGN (Network) Back to APU102PG (Pentium)]] | |||
[[Upgrade Procedure for APU102E Series (486) to APU102PGN]] | * [[COM4 “N” Card-Network Option Modification Procedure]] | ||
* [[COM4N to COM4 Reversion Procedure]] | |||
[[APU102PGN Reversion Procedures Back to APU102E Series (486)]] | * [[LX800 Upgrade Procedures with COM4N for APU102]] | ||
* [[LX800 Upgrade Procedures with LX-COM for APU102]] | |||
[[Upgrade Procedures for APU102PG (Pentium) to APU102PGN (Network)]] | * [[LX800 Upgrade Procedures with LX-COM for Tracker]] | ||
* [[Startup ROM and CF Upgrade, LPMTX with PSSD]] | |||
[[Reversion Procedures for APU102PGN (Network) Back to APU102PG (Pentium)]] | * [[Pre-configured LX800 Upgrade Procedures for APU-102]] | ||
* [[Upgrade LX800 w/COM4N to LX-COM]] | |||
[[COM4 “N” Card-Network Option Modification Procedure]] | * [[APU-102 Pentium Card Handling Procedure]] | ||
* [[Imaging Compact Flash with USB Adapter]] | |||
[[COM4N to COM4 Reversion Procedure]] | * [[APU102 Presence Circuit Failure Detection]] | ||
* [[Installing and Programming the Reno L-1300 Series Presence Detector]] | |||
[[LX800 Upgrade Procedures with COM4N for APU102]] | * [[Potential COM4 Board Compatibility Issue with RailNet APU Pentium Version 5 Upgrade]] | ||
* [[New Product Release Reno L-1300 Series Presence Detector]] | |||
[[LX800 Upgrade Procedures with LX-COM for APU102]] | * [[APU102 Auto-Recovery Quick Start Guide (LPMTX)]] | ||
* [[APU102 Auto-Recovery Quick Start Guide (LX800)]] | |||
[[LX800 Upgrade Procedures with LX-COM for Tracker]] | * [[Version 5.X Upgrade Credit Program]] | ||
* [[Transport Stats]] | |||
[[Startup ROM and CF Upgrade, LPMTX with PSSD]] | |||
[[Pre-configured LX800 Upgrade Procedures for APU-102]] | |||
[[Upgrade LX800 w/COM4N to LX-COM]] | |||
[[APU-102 Pentium Card Handling Procedure]] | |||
[[Imaging Compact Flash with USB Adapter]] | |||
[[APU102 Presence Circuit Failure Detection]] | |||
[[Installing and Programming the Reno L-1300 Series Presence Detector]] | |||
[[Potential COM4 Board Compatibility Issue with RailNet APU Pentium Version 5 Upgrade]] | |||
[[New Product Release Reno L-1300 Series Presence Detector]] | |||
[[APU102 Auto-Recovery Quick Start Guide (LPMTX)]] | |||
[[APU102 Auto-Recovery Quick Start Guide (LX800)]] | |||
[[Version 5.X Upgrade Credit Program]] | |||
[[Transport Stats]] | |||
=== Additional Documents === | === Additional Documents === | ||
[[Cellular Modem Installation (Preconfigured Sierra Wireless Router)]] | * [[Cellular Modem Installation (Preconfigured Sierra Wireless Router)]] | ||
* [[Frauscher Wheel Detector Installation and Optimization]] | |||
[[Frauscher Wheel Detector Installation and Optimization]] | * [[Frauscher Wheel Detector Installation with Web Bolt Kit]] | ||
* [[TDA-205 Installation and Optimization to MicroHBD]] | |||
[[Frauscher Wheel Detector Installation with Web Bolt Kit]] | * [[TDA205 Installation and Optimization for Routing on APU-102]] | ||
* [[Upgrade AEI Site with Multiplexed AI1200/AR2200 to MPRX]] | |||
[[TDA-205 Installation and Optimization to MicroHBD]] | * [[Upgrade AEI Site with Dedicated AI1200/AR2200 to MPRX]] | ||
* [[SSH Installation Procedure]] | |||
[[TDA205 Installation and Optimization for Routing on APU-102]] | * [[DCL Reporting Segment Setup Procedure]] | ||
* [[Upgrade Procedures for APU102 Application]] | |||
[[Upgrade AEI Site with Multiplexed AI1200/AR2200 to MPRX]] | |||
[[Upgrade AEI Site with Dedicated AI1200/AR2200 to MPRX]] | |||
[[SSH Installation Procedure]] | |||
[[DCL Reporting Segment Setup Procedure]] | |||
=== Additional Drawings (2024) === | |||
[[ | * [[Media:70-0006-02 Pedestal wiring detail with Tief or Frauscher and track circuit.pdf|70-0006-02 Pedestal/J-Box Lead-in Wiring Detail Wheel Detector and Track Circuit]] | ||
* [[Media:70-0177-00 Triple Track Presence Wiring Detail.pdf|70-0177-00 Triple Track Communications & Presence Wiring Detail]] | |||
* [[Media:70-0179-00revb SLU with Tief EPIC LVD2000.pdf|70-0179-00 SLU/SHU LVD-2000 System Flow For Tiefenbach & Epic III C]] | |||
* [[Media:70-0179-01 Banner Presence Wiring Detail.pdf|70-0179-01 Banner Presence Wiring Detail QT50R & Q120]] | |||
* [[Media:70-0179-02 BNSF SLU with Tief Banner LVD.pdf|70-0179-02 BNSF SLU/SHU LVD-2000 System Flow for Tiefenbach & Banner]] | |||
* [[Media:70-0179-02 SLU with Tief Banner LVD.pdf|70-0179-02 SLU/SHU LVD-2000 System Flow for Tiefenbach & Banner]] | |||
* [[Media:70-0179-03A Banner Presence Site Elevation.pdf|70-0179-03A Banner Presence Detector Mounting Detail]] | |||
* [[Media:70-0179-07 SLU with LVD Tief TEL50 EPIC.pdf|70-0179-07 SLU/SHU System Flow For LVD-2000, Tiefenbach, Tel50, & Epic III C]] | |||
* [[Media:70-0179-08 SLU with Tief Tel50 Banner LVD.pdf|70-0179-08 SLU/SHU System Flow For LVD-2000, Tiefenbach, Tel50, & Banner]] | |||
* [[Media:70-0179-09 SLU with Frauscher Erico Banner LVD.pdf|70-0179-09 SLU/SHU System Flow For LVD-2000, Frauscher, Erico, & Epic III C]] | |||
* [[Media:70-0179-10 SLU with Frauscher Tel50 Banner LVD.pdf|70-0179-10 SLU/SHU System Flow For LVD-2000, Frauscher, Tel50, & Epic III C]] | |||
* [[Media:70-0274-01 SLU-SHU LVD-Tief-Zepic-TEL50.pdf|70-0274-01 SLU SHU w/ LVD-2000, Tiefenbach, Zepic, Tel50]] | |||
* [[Media:70-0274-03-A Single AEI System Flow-LVD Frauscher TEL50 Z3.pdf|70-0274-03-A SLU SHU SUHU w/ LVD-2000C, Frauscher, Zepic Z3]] | |||
* [[Media:70-0274-06 Track Presence with Z3.pdf|70-0274-06 Track Presence with Zepic Z3]] | |||
* [[Media:570-0008-00 DLR RESTRICTIVE SYSTEM PERSPECTIVE SRL470 ANTENNAS.pdf|570-0008-00 Restricted Site Antenna Elevation Detail SRL470 Low Profile Antennas]] | |||
* [[Media:570-0009-00 DLR ANTENNA ELEVATION DETAIL SRL470 ANTENNAS.pdf|570-0009-00 SRL 470WB Log Periodic Antenna Elevation Detail w/ Conduit Detail]] | |||
* [[Media:571-0017-01 RF Wiring diagram Single Track Ultra High Speed.pdf|571-0017-01 RF Wiring Diagram Single Track Ultra High Speed]] | |||
* [[Media:571-0017-02 RF Wiring diagram MPRX High Speed Muxed Lowboys One Side Near Parapanel.pdf|571-0017-02 RF Wiring Diagram Parapanel Near Side High Speed, Restricted Height Antennas Far Side]] | |||
* [[Media:571-0017-03 RF Wiring diagram MPRX High Speed Muxed Lowboys One Side Far Parapanel.pdf|571-0017-03 RF Wiring Diagram Parapanel Farside High Speed, Restricted Height Antennas Near Side]] | |||
* [[Media:571-0017-04 RF Wiring diagram MPRX High Speed Muxed Lowboys Both Sides.pdf|571-0017-04 RF Wiring Diagram High Speed, Muxed Restricted Height Antennas, Both Sides]] | |||
* [[Media:571-0017-05 RF Wiring diagram MPRX Low-Med Speed Muxed Parapanel.pdf|571-0017-05 MPRX Wiring Detail Low/Medium Speed, Muxed RF]] | |||
* [[Media:571-0017-06 MPRX Wiring Detail High Speed Dedicated RF.pdf|571-0017-06 MPRX Wiring Detail High Speed, Dedicated RF]] | |||
* [[Media:571-0017-07 RF Wiring diagram MPRX DLR.pdf|571-0017-07 MPRX Wiring Detail Double Track Low/Medium Speed Restricted]] | |||
* [[Media:571-0017-08 RF Wiring diagram MPRX DHR.pdf|571-0017-08 MPRX Wiring Detail Double Track High Speed Restricted]] | |||
* [[Media:571-0029-00-A ROUTE INDICATION with FRAUSCHER AND TDA205s WIRING DIAGRAM.pdf|571-0029-00-A 2 Frauscher Transducers w/ TDA205s For Route Indication]] | |||
Latest revision as of 14:41, 8 May 2026
The following articles are provided in the documentation packet provided with new RailNET systems in 2024.
Procedures and Bulletins
- LPMTX Battery Notice
- LX-800 Battery Notice
- LX-800 With LXCOM Battery Notice
- LXCOM Upgrade Battery Notice
- APU-102 Pentium Upgrade Quick Reference
- UART Chip Replacement on COM4 and COM4A Boards
- Upgrade Procedure for APU102E Series (486) to APU102PGN
- APU102PGN Reversion Procedures Back to APU102E Series (486)
- Upgrade Procedures for APU102PG (Pentium) to APU102PGN (Network)
- Reversion Procedures for APU102PGN (Network) Back to APU102PG (Pentium)
- COM4 “N” Card-Network Option Modification Procedure
- COM4N to COM4 Reversion Procedure
- LX800 Upgrade Procedures with COM4N for APU102
- LX800 Upgrade Procedures with LX-COM for APU102
- LX800 Upgrade Procedures with LX-COM for Tracker
- Startup ROM and CF Upgrade, LPMTX with PSSD
- Pre-configured LX800 Upgrade Procedures for APU-102
- Upgrade LX800 w/COM4N to LX-COM
- APU-102 Pentium Card Handling Procedure
- Imaging Compact Flash with USB Adapter
- APU102 Presence Circuit Failure Detection
- Installing and Programming the Reno L-1300 Series Presence Detector
- Potential COM4 Board Compatibility Issue with RailNet APU Pentium Version 5 Upgrade
- New Product Release Reno L-1300 Series Presence Detector
- APU102 Auto-Recovery Quick Start Guide (LPMTX)
- APU102 Auto-Recovery Quick Start Guide (LX800)
- Version 5.X Upgrade Credit Program
- Transport Stats
Additional Documents
- Cellular Modem Installation (Preconfigured Sierra Wireless Router)
- Frauscher Wheel Detector Installation and Optimization
- Frauscher Wheel Detector Installation with Web Bolt Kit
- TDA-205 Installation and Optimization to MicroHBD
- TDA205 Installation and Optimization for Routing on APU-102
- Upgrade AEI Site with Multiplexed AI1200/AR2200 to MPRX
- Upgrade AEI Site with Dedicated AI1200/AR2200 to MPRX
- SSH Installation Procedure
- DCL Reporting Segment Setup Procedure
- Upgrade Procedures for APU102 Application
Additional Drawings (2024)
- 70-0006-02 Pedestal/J-Box Lead-in Wiring Detail Wheel Detector and Track Circuit
- 70-0177-00 Triple Track Communications & Presence Wiring Detail
- 70-0179-00 SLU/SHU LVD-2000 System Flow For Tiefenbach & Epic III C
- 70-0179-01 Banner Presence Wiring Detail QT50R & Q120
- 70-0179-02 BNSF SLU/SHU LVD-2000 System Flow for Tiefenbach & Banner
- 70-0179-02 SLU/SHU LVD-2000 System Flow for Tiefenbach & Banner
- 70-0179-03A Banner Presence Detector Mounting Detail
- 70-0179-07 SLU/SHU System Flow For LVD-2000, Tiefenbach, Tel50, & Epic III C
- 70-0179-08 SLU/SHU System Flow For LVD-2000, Tiefenbach, Tel50, & Banner
- 70-0179-09 SLU/SHU System Flow For LVD-2000, Frauscher, Erico, & Epic III C
- 70-0179-10 SLU/SHU System Flow For LVD-2000, Frauscher, Tel50, & Epic III C
- 70-0274-01 SLU SHU w/ LVD-2000, Tiefenbach, Zepic, Tel50
- 70-0274-03-A SLU SHU SUHU w/ LVD-2000C, Frauscher, Zepic Z3
- 70-0274-06 Track Presence with Zepic Z3
- 570-0008-00 Restricted Site Antenna Elevation Detail SRL470 Low Profile Antennas
- 570-0009-00 SRL 470WB Log Periodic Antenna Elevation Detail w/ Conduit Detail
- 571-0017-01 RF Wiring Diagram Single Track Ultra High Speed
- 571-0017-02 RF Wiring Diagram Parapanel Near Side High Speed, Restricted Height Antennas Far Side
- 571-0017-03 RF Wiring Diagram Parapanel Farside High Speed, Restricted Height Antennas Near Side
- 571-0017-04 RF Wiring Diagram High Speed, Muxed Restricted Height Antennas, Both Sides
- 571-0017-05 MPRX Wiring Detail Low/Medium Speed, Muxed RF
- 571-0017-06 MPRX Wiring Detail High Speed, Dedicated RF
- 571-0017-07 MPRX Wiring Detail Double Track Low/Medium Speed Restricted
- 571-0017-08 MPRX Wiring Detail Double Track High Speed Restricted
- 571-0029-00-A 2 Frauscher Transducers w/ TDA205s For Route Indication