RailNET Upgrade Guidance
Current Supported Configuration
| Item | For Sale | Supported |
|---|---|---|
| T10 (processor) | Yes | Yes |
| LX-800 (processor) | No | Yes |
| LPMTX (processor) | No | No |
| MPASS (RF Interface Board) | Yes | Yes |
| MPRX (RFID Radio) | Yes | Yes |
| AI1200 (RF Interface Board) | No | Yes |
| AR2200 (RF Radio) | No | Yes |
| Frauscher Wheel Sensor | Yes | Yes |
| Tiefenbach Wheel Sensor | Yes | Yes |
| TDA-104 (Wheel Sensor Amp internal) | No | Yes |
| TDA-204 (Wheel Sensor Amp internal) | Yes | Yes |
| TDA-105 (Wheel Sensor Amp external) | Yes | Yes |
| TDA-205 (Wheel Sensor Amp external) | Yes | Yes |
Compatibility Matrix
| T10 | LX-800 | LPMTX | MPASS | MPRX | AI1200 | AR220 | Frauscher | Tiefenbach | TDA-104 | TDA-204 | TDA-105 | TDA-205 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T10 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |||
| LX-800 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |||
| LPMTX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |||
| MPASS | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| MPRX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| AI1200 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| AR2200 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| Frauscher | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| Tiefenbach | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| TDA-104 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| TDA-204 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| TDA-105 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | |
| TDA-205 | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX | XX |
XX |
|
MPRX Upgrade
Summary
The AI1200 and AR2200 combination RFID package from Transcore has been obsoleted. The MPRX is the replacement RFID radio for Railroad AEI. The MPASS card is the RailNET controller adapter sitting in the same place as the AI1200 reader card. Software for the MPRX conversion requires a LX-800 Minimum. Total hardware package guidance below.
Basic Upgrade Kit
Processor Requirements
If the site is equipped with a LPMTX or previous processor, a T10 Upgrade is required.
If the processor is upgraded and the Wheel Amplifier is a TDA-104, a TDA-204 will also be required.
Frauscher Upgrade