Jump to content

Restoring T-10 Software on an APU-102 Unit

From DocDepot
Revision as of 19:38, 18 December 2025 by AShanks (talk | contribs)

Overview

This page contains details on how to back up and restore your APU-102 unit.

To protect the unit from data loss, ensure that you routinely create a mirror backup (also known as a snapshot) of the T-10 software on the APU-102 unit. Do this both before and after updating the software.

Back up your parameters after any configuration change.

Use these backups to restore the T-10 software and settings in the event that the drive becomes corrupted. 

Prerequisites

Before creating a backup, ensure that:

  • The T‑10 is installed and running correctly on the APU‑102.
  • Site parameters are configured.

Backing up parameters

To back up parameters, complete the following steps:

  1. Connect to the APU-102 unit.
  2. Enter the appropriate session number. (For example, 1, 2, 3, 4, or X.)
  3. Enter your password and name credentials.
  4. At APU102XP:Main 1>, enter: BP.
  5. Press Enter.
  6. Reboot the unit.
Retrieved from "https://docdepot.railrsm.com/index.php?title=Restoring_T-10_Software_on_an_APU-102_Unit&oldid=2186"