Restoring T-10 Software on an APU-102 Unit
Revision as of 21:26, 5 December 2025 by AShanks (talk | contribs) (Created page with "Any time you change parameters, update software, or otherwise modify the AEI drive, run the <code>ibackup</code> command to create or update the mirror backup. This ensures the T‑10 software, configuration, and supporting files can be fully restored if the AEI drive becomes corrupted. =Prerequisites= Before creating a backup, ensure that: * The T‑10 is installed and running correctly on the APU‑102. * Site parameters are configured.")
Any time you change parameters, update software, or otherwise modify the AEI drive, run the ibackup command to create or update the mirror backup. This ensures the T‑10 software, configuration, and supporting files can be fully restored if the AEI drive becomes corrupted.
Prerequisites
Before creating a backup, ensure that:
- The T‑10 is installed and running correctly on the APU‑102.
- Site parameters are configured.