User contributions for GMalcom

20:5720:57, 17 March 2025 diff hist +5,126 N Cellular Modem Installation (Preconfigured Sierra Wireless Router) Created page with "The purpose of this article is the installation of IP cellular modem and related equipment. If necessary, refer to documentation provided with each device or their website for specifics. A single cell modem can connect to multiple devices at the site using an unmanaged switch. Adjust procedure accordingly if used. Contact Comet Electronics for help with configuration and testing of the APU-102. '''Requirements:''' === Parts Required === *Sierra Wireless C..."
18:5118:51, 17 March 2025 diff hist +34 N File:Img1742041693364.png GMalcom moved page File:Img1742041693364.png to File:TDA-205-top.png: More descriptive title current Tag: New redirect
18:5118:51, 17 March 2025 diff hist 0 m File:TDA-205-top.png GMalcom moved page File:Img1742041693364.png to File:TDA-205-top.png: More descriptive title current

14:3014:30, 14 March 2025 diff hist +196 m TDA-205 Installation and Optimization to MicroHBD →Frauscher Wheel Detector Calibration
14:3014:30, 14 March 2025 diff hist +577 TDA-205 Installation and Optimization to MicroHBD →Frauscher Wheel Detector Calibration
14:2614:26, 14 March 2025 diff hist +317 TDA-205 Installation and Optimization to MicroHBD →TDA205 Installation
14:2514:25, 14 March 2025 diff hist 0 N File:TDA-205-top.png No edit summary
13:5213:52, 14 March 2025 diff hist +26 m TDA-205 Installation and Optimization to MicroHBD →Frauscher Wheel Detector Calibration
13:5113:51, 14 March 2025 diff hist +7,252 N TDA-205 Installation and Optimization to MicroHBD Created page with "The following details installation and optimization of the TDA205 to utilize Frauscher RSR110-002, single segment wheel detector(s) to wayside equipment, such as HBD, HWD, or other defect detectors. The actual detector is housed in the SYS1 side of the sensor housing. Optionally, some customers may choose to use the dual segment Frauscher, RSR110-001 for these installations. Setup (using SYS1) is the same for either.If needing installation for routing on APU-10..."

20:2620:26, 13 March 2025 diff hist −8 m Upgrading LPMTX Software on APU-102 No edit summary
19:5519:55, 13 March 2025 diff hist +4,971 N Upgrading LPMTX Software on APU-102 Created page with "= LX-800 = :1. Type the / (forward slash). Minimum application version for upgrade is 5.1.1 B98. :2. Save a parameter dump off-line. :3. Perform BP :4. Use ZREC and upload the Payload Files (All files EXCEPT *.BAT files and ZIP.PSP). See Note below if connection is via dial-up. :5. Perform SHELL IBACKUP, this requires a full reboot :6. Wait about 5 minutes and reconnect to the APU :7. Send *.BAT files and ZIP.PSP from same folder as..."

19:5219:52, 12 March 2025 diff hist +2,771 N APU-102 Pentium Card Handling Procedure Created page with "=== Pentium Card Removal Procedure === {| style="border-collapse: collapse; margin-left: auto; margin-right: auto; width: 661px;" border="1px" cellpadding="4px" |- | style="width: 57.8247px; background-color: rgb(230, 126, 35); text-align: center;" | '''Caution''' | style="width: 584.278px;" | ALWAYS use proper ESD handling procedures when removing or installing cards in the APU-102. |} 1) Disconnect cables from card2)..."
19:5019:50, 12 March 2025 diff hist 0 N File:Img1741884917899.png No edit summary current
19:4819:48, 12 March 2025 diff hist 0 N File:Img1741843050187.png No edit summary current
19:4719:47, 12 March 2025 diff hist 0 N File:Img1741853046185.png No edit summary current
19:4619:46, 12 March 2025 diff hist 0 N File:Img1741898885143.png No edit summary current
19:4219:42, 12 March 2025 diff hist +8,341 N Upgrade LX800 w/COM4N to LX-COM Created page with "This procedure details how to upgrade an APU-102 to the LX800 processor card with the Comet Electronics LX-COM board. It is for upgrading the APU-102 with the LX800 processor and COM4N to utilize the LX-COM, quad serial board. = Required Materials and Tools = === Upgrade Parts Required === *LX-COM daughter-card (4-Port Serial Adapter) with 2.7Ah External CMOS Battery *IRQ cable (2 connector, CBL-151-1124H) *24” CAT5 network patch cable *RJ45 Pass-through Jack..."
19:3719:37, 12 March 2025 diff hist 0 N File:Img1741854987084.png No edit summary current
19:1419:14, 12 March 2025 diff hist +11 m Pre-configured LX800 Upgrade Procedures for APU-102 No edit summary
19:1319:13, 12 March 2025 diff hist +25 m Pre-configured LX800 Upgrade Procedures for APU-102 →4.0 Quick Start Upgrade Procedure
19:1319:13, 12 March 2025 diff hist +10,175 N Pre-configured LX800 Upgrade Procedures for APU-102 Created page with "This procedure is on how to upgrade an APU-102 unit to the latest LX800 processor card with the Comet Electronics LX-COM board. It is for upgrading the APU-102 with a Pre-Configured LX800 upgrade kit. For uninitialized kits, refer to document LX800 Upgrade Procedures with LX-COM. = Required Materials and Tools = === Upgrade Kit === Pre-Configured LX800 Upgrade Kit – Includes the following:LX800 CPU Card with LX-COM daughter-card (4-Port Serial Adapter)</p..."
19:0019:00, 12 March 2025 diff hist +7,894 N LX800 Upgrade Procedures with LX-COM for Tracker Created page with "This procedure details how to upgrade an APU102 (Tracker) unit to the latest LX800 processor card with the Comet Electronics LX-COM board. It is for upgrading the APU102, regardless of current configuration, to the LX800 platform. = Required Materials and Tools = === Upgrade Parts Required === LX800 Upgrade Kit – Includes the following: *LX800 CPU Card with LX-COM daughter-card (4-Port Serial Adapter) *2.7Ah External CMOS Battery *Compact Flash with applica..."
18:5518:55, 12 March 2025 diff hist +239 m LX800 Upgrade Procedures with LX-COM for APU102 No edit summary
18:5418:54, 12 March 2025 diff hist +297 m LX800 Upgrade Procedures with LX-COM for APU102 →Upgrade Procedure
18:4118:41, 12 March 2025 diff hist +130 LX800 Upgrade Procedures with LX-COM for APU102 →Upgrade Procedure
18:4118:41, 12 March 2025 diff hist 0 N File:Img1741856805947.png No edit summary current
18:3518:35, 12 March 2025 diff hist 0 N File:Img1741876865860.png No edit summary current
17:4817:48, 12 March 2025 diff hist 0 N File:Img1741849110291.png No edit summary current
17:4817:48, 12 March 2025 diff hist +10,010 N LX800 Upgrade Procedures with LX-COM for APU102 Created page with "To provide the procedure to upgrade an APU102 unit to the latest LX800 processor card with the Comet Electronics LX-COM board. {| |- | '''ATTENTION!''' | The new LX-800 processor board in this kit comes with a compact flash preloaded with the Comet AEI application software, version 5.x. Comet Electronics is permitting the transfer of the license from an existing 5.x AEI licensed system. The applicable embedded Windows and RTX licenses are non-transfe..."
13:4113:41, 12 March 2025 diff hist +47 m Startup ROM and CF Upgrade, LPMTX with PSSD →Upgrade Procedure
13:4013:40, 12 March 2025 diff hist +157 m Startup ROM and CF Upgrade, LPMTX with PSSD →Optional

20:4520:45, 11 March 2025 diff hist +7,768 N Startup ROM and CF Upgrade, LPMTX with PSSD Created page with "The auto-recovery software is designed to automatically detect and recover a corrupted file system. This functionality is possible by installing a mirror image of the AEI drive into a hidden storage area on the Compact Flash card (CF). When corruption is detected, the CF card is automatically re-imaged based upon the hidden “mirror” backup image. This update is for LPMTX based APU with network hardware installed (4-board Pentium stack).'''Requirements..."
20:4220:42, 11 March 2025 diff hist 0 N File:Img1741735853014.png No edit summary current
20:2820:28, 11 March 2025 diff hist +16,503 N APU102 Presence Circuit Failure Detection Created page with "This document covers the presence circuit failure logic employed by all versions of the APU102 mainline AEI software. It also covers methods that can be used to help identify optimal settings to improve failure detection logic on a site specific basis. {| style="border-collapse: collapse; width: 60%; margin-left: auto; margin-right: auto;" border="1px" cellpadding="2px" |- | style="width: 13.9389%; background-color: rgb(230, 126, 35);" | <p style="te..."
15:5215:52, 11 March 2025 diff hist +8,510 N APU-102 Pentium Upgrade Quick Reference Created page with "<div> === Software Version 5.0 === </div> === Upgrade Parts Required === *LPM-TX Pentium CPU Card with SSD daughter-card (attached) *Preloaded with start-up ROM, operating system, application executable, support files and generic parameters. *IRQ cable (CBL-151-1124F) === Tools/supplies Required === *Flat blade screwdriver *Laptop computer with communication program such as ProComm, HyperTerminal, etc. *Null modem cable or modem cable with null adapter (25-pin DB male..."
15:4915:49, 11 March 2025 diff hist 0 N File:Img1741712530563.png No edit summary current
15:4715:47, 11 March 2025 diff hist 0 N File:Img1741789894845.png No edit summary current
15:4415:44, 11 March 2025 diff hist 0 N File:Img1741774155351.png No edit summary current
15:3915:39, 11 March 2025 diff hist 0 N File:Img1741770377260.png No edit summary current
15:0415:04, 11 March 2025 diff hist +40 m APU102 Auto-Recovery Quick Start Guide (LPMTX) →Checking the mirror status using “C:\Mirror.txt”:
14:2014:20, 11 March 2025 diff hist +8,338 N APU102 Auto-Recovery Quick Start Guide (LPMTX) Created page with "The auto-recovery software is designed to automatically detect and recover a corrupted file system. This functionality is possible by installing a mirror image of the boot drive into a hidden storage area on the CF card. When corruption is detected, the boot drive is automatically re-imaged based upon the hidden “mirror” backup image.The mirror image is created manually using “Shell IBackup” command, which can be run from the APU102 supervisory me..."
13:4113:41, 11 March 2025 diff hist +60 N APU102 Auto-Recovery Quick Start Guide GMalcom moved page APU102 Auto-Recovery Quick Start Guide to APU102 Auto-Recovery Quick Start Guide (LX800): Needed more specific title current Tag: New redirect
13:4113:41, 11 March 2025 diff hist 0 m APU102 Auto-Recovery Quick Start Guide (LX800) GMalcom moved page APU102 Auto-Recovery Quick Start Guide to APU102 Auto-Recovery Quick Start Guide (LX800): Needed more specific title
13:4013:40, 11 March 2025 diff hist 0 m APU102 Auto-Recovery Quick Start Guide (LX800) →Checking the mirror status using “\Mirror.txt"
13:3913:39, 11 March 2025 diff hist +1 m APU102 Auto-Recovery Quick Start Guide (LX800) →Creating or updating the backup mirror image
13:3713:37, 11 March 2025 diff hist +2,352 N Version 5.X Upgrade Credit Program Created page with "The LX800 board you have purchased qualifies for a one-time license transfer from a previously purchased XPE based product. It does not apply to the MS-DOS version 4.x, even if it is running on the Pentium platform. The version 5.x software license is available for purchase to upgrade from 4.x. Please contact Comet Electronics at 888-700-4214 or 816-245-5400 if you have any questions regarding licensing.In order to take advantage of the “upgrade credit” on..."

21:3421:34, 7 March 2025 diff hist +3,324 N Potential COM4 Board Compatibility Issue with RailNet APU Pentium Version 5 Upgrade Created page with "This product bulletin is to inform customers of a potential COM4 board compatibility issue with Comet Electronics RailNet APU Pentium version 5 upgrade. It applies to 486-based APU units that have been upgraded with the APU Version 5 Pentium Kit. This applies only to units containing either a COM4 board or a COM4A board manufactured before 1999. = Specifics = Compatibility testing has revealed that in rare instances, when a 486-based APU is upgraded with the AP..."
21:2121:21, 7 March 2025 diff hist −17 UART Chip Replacement on COM4 and COM4A Boards →UART Chip Replacement
21:2021:20, 7 March 2025 diff hist +785 UART Chip Replacement on COM4 and COM4A Boards →UART Chip Replacement
21:1321:13, 7 March 2025 diff hist 0 N File:Img1741466365673.png No edit summary current

17 March 2025

14 March 2025

13 March 2025

12 March 2025

11 March 2025

7 March 2025