Jump to content

LXCOM Upgrade Battery Notice

From DocDepot
Revision as of 18:28, 7 April 2025 by GMalcom (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

ATTENTION!

The on-board CMOS battery on the LX800 MUST be disabled before connecting the external battery. Leaving the on-board CMOS battery enabled can cause catastrophic failure with the external battery connected.

Disable the on-board CMOS battery by removing the jumper on J31. Leave the jumper installed on pin 1 only so it will be available for future use.

Retrieved from "https://docdepot.railrsm.com/index.php?title=LXCOM_Upgrade_Battery_Notice&oldid=1650"