LXCOM Upgrade Battery Notice
Revision as of 20:18, 6 March 2025 by GMalcom (talk | contribs) (Created page with "{| style="border-collapse: collapse; width: 70%; margin-left: auto; margin-right: auto;" border="1px" cellpadding="2px" |- | style="width: 13.8955%; background-color: rgb(224, 62, 45);" | <p style="text-align: center;" >'''ATTENTION!'''</p> | style="width: 78.8598%;" | <p>The on-board CMOS battery on the LX800 '''MUST''' be disabled before connecting the external battery. Leaving the on-board CMOS battery enabled can cause catastrophic failure with the external battery...")
ATTENTION! |
The on-board CMOS battery on the LX800 MUST be disabled before connecting the external battery. Leaving the on-board CMOS battery enabled can cause catastrophic failure with the external battery connected. Disable the on-board CMOS battery by removing the jumper on J31. Leave the jumper installed on pin 1 only so it will be available for future use. |
