400194
Special:Whatlinkshere/400194
Low Voltage Detector LVD-2000
General
DC power distribution for battery powered AEI sites which includes advanced battery monitoring, low DC warning notification and battery drain protection.
Features
Low Battery Voltage Detection Continuously monitors battery voltage. When warning voltage level is reached it sends signal to APU. A “Low Battery Voltage“ maintenance message will be sent to your maintenance host. A complimentary maintenance message will be sent when voltage is restored. Status indicator. Test button to simulate low battery input at warning level.
Battery Load Cutout Will disconnect all loads from battery when cutoff voltage level is reached to prevent excess battery drain and resulting damage to batteries. Automatically re-establish load connections when battery charger voltage is restored. Status indicator Test button to simulate low battery input at cutoff level.
DC Power Distribution Simplified DC distribution wiring. Fused power outputs for standard site configurations (up to 3 APU’s and their auxiliary devices) Fused Auxiliary DC outputs are switchable by command on APU. Can be used to reset loop detectors, TDA105’s, SmartPasses, etc. Output power status indicators.
Additional Features All DC outputs protected by resettable fuses. All solid state components for increased reliability. Uses connections similar to ones already in use. Available for 12 or 24 volt systems.