LPMTX Battery Notice: Difference between revisions
Created page with "<p>To conserve CMOS battery life during storage, the red battery jumper, J22, is shipped in the OFF position. Before powering up for the first time, move the red battery jumper (J22) to the ON position. After powering the APU up, set the clock (date and time) on the APU. (Refer to APU-102 System Operations Manual, Section 4). Perform a fast reboot (R,F) to save the time and apply DST rules. The clock may need to be reset after site parameters are uploaded.</p>image:img..." |
No edit summary |
||
| Line 1: | Line 1: | ||
<p>To conserve CMOS battery life during storage, the red battery jumper, J22, is shipped in the OFF position. Before powering up for the first time, move the red battery jumper (J22) to the ON position. After powering the APU up, set the clock (date and time) on the APU. (Refer to APU-102 System Operations Manual, Section 4). Perform a fast reboot (R,F) to save the time and apply DST rules. The clock may need to be reset after site parameters are uploaded.</p>[[image:img1741288210394.png|700px|center|frameless]] | <p>To conserve CMOS battery life during storage, the red battery jumper, J22, is shipped in the OFF position. Before powering up for the first time, move the red battery jumper (J22) to the ON position. After powering the APU up, set the clock (date and time) on the APU. (Refer to APU-102 System Operations Manual, Section 4). Perform a fast reboot (R,F) to save the time and apply DST rules. The clock may need to be reset after site parameters are uploaded.</p>[[image:img1741288210394.png|700px|center|frameless]] | ||
[[Category:Procedures]] | |||
Latest revision as of 18:29, 7 April 2025
To conserve CMOS battery life during storage, the red battery jumper, J22, is shipped in the OFF position. Before powering up for the first time, move the red battery jumper (J22) to the ON position. After powering the APU up, set the clock (date and time) on the APU. (Refer to APU-102 System Operations Manual, Section 4). Perform a fast reboot (R,F) to save the time and apply DST rules. The clock may need to be reset after site parameters are uploaded.
