Appendix A - System Parameters

The following system parameter groups are listed as they appear on the Edit
Parameters (EP) menu. See Section 4.0, User Interface, for information on using the
EP command on the Supervisory Menu.
These parameters are for reference only and are not intended to be a
comprehensive listing as the APU software is constantly evolving. Through
periodic reviews and updates, we endeavor to keep it as current as possible. For
parameters not found in this text, refer to the on-board help within the EP
application (<CRTL>-U) or to the revision text file “VERSION.TXT” on the APU.
Parameters from this text but not on your APU are not available to the current
version of software in the APU.

A.1 Session-Specific Parameters

A.1.1 Session1.SiteInformation

Session1.SiteInformation
Parameter	Description	Valid Value(s)
.SalutationMessage	Required. Session name displayed on login screen. If blank, session is not activated.	Up to 39 alphanumeric.
.SiteName	Required. Site name.	Up to 21 alphanumeric. Default: “UNKNOWN”
.USIDOwnerID	Required. Railroad identifier. Typically contains railroad’s AAR accounting code.	Up to 5 alphanumeric.
.USIDUnitNum	Required. Number that uniquely identifies the unit.	Up to 7 alphanumeric.
.SPLC	Optional. Standard point location code (used in the TCS format report).	Up to 10 numeric. Default: 0
.StationNumber	Optional. Site station number.	Up to 10 numeric. Default: 0
.ReaderNumber	Optional. Reader number of site (used in COMPASS and CR160 reports).	Up to 5 numeric. Default: 1
.Milepost	Optional. Milepost location along the track (in tenths). 21.4 would be entered as 214.	Up to 10 numeric. Default: 0
.CIRC7	Optional. Parameter used to describe the site (used by TCS format report only).	Up to 7 alphanumeric. Default: 000000
.RailroadInitials	Optional. Initial of railroad session supports.	Up to 5 alphanumeric.
.TrackDesignation	Optional. Track description for the unit.	Up to 7 alphanumeric. Default: MAIN
.TrackOrientation	Required. Defines the direction of travel of a train past the site. The first character represents the direction a leftward train would be moving, the second character is a “-”, the third character represents the train direction as it moves rightward. All directions are based on standing on the antenna ‘0’ side of the track, facing the track. Generally, railroad direction is used which may not be the same as cardinal direction.	Up to 3 alphanumeric. E-W - Leftward train moves East; Rightward train moves West. W-E - Leftward train moves West; Rightward train moves East (Default) N-S - Leftward train moves North; Rightward train moves South S-N - Leftward train moves South; Rightward train moves North.
.TrackDirection	Optional. Default direction of the track. Recommend not changing but use TrackOrientation.	Up to 3 alphanumeric. Default: L-R
.SiteType	Optional. Site identifier used in COMPASS report.	Up to 5 numeric. Default: 0
.PrimaryPhoneNumber	Optional. Main phone number of the site. (Number you would dial to reach site).	Up to 14 alphanumeric. User-defined primary site number
.SecondaryPhoneNumber	Optional. Secondary phone number of the site (assuming two phone lines are available to the APU at the site).	Up to 14 alphanumeric. User-defined second site number (if applicable).