Appendix F - Specifications: Difference between revisions
OldAshanks (talk | contribs) No edit summary |
OldAshanks (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
= APU-102 Internal Components Specifications = | = APU-102 Internal Components Specifications = | ||
== Inside the Card Cage == | == Inside the Card Cage == | ||
=== L-Series (LX-800) APU-102 === | === L-Series (LX-800) APU-102 ===<p>The following cards are pre-installed inside the APU-102 card cage:</p> | ||
<p>The following cards are pre-installed inside the APU-102 card cage:</p> | |||
*LX-800 “Geode” Processor Card | *LX-800 “Geode” Processor Card | ||
*TDA-104 Card | *TDA-104 Card | ||
*DT4070 Series Modem Card | *DT4070 Series Modem Card | ||
*COM4N Card or LX-COM (Quad serial board-daughtercard on LX-800) | *COM4N Card or LX-COM (Quad serial board-daughtercard on LX-800)<p>Specific card information and drawings may be found later in this section.</p> | ||
<p>Specific card information and drawings may be found later in this section.</p> | |||
=== PN-Series (Pentium with network option) APU-102 ===<p>The following cards are pre-installed inside the APU-102 card cage:</p> | |||
*LPM-TX Pentium Card | *LPM-TX Pentium Card | ||
*PPM-10/100, PC104, Network Interface Card (daughtercard on Pentium) | *PPM-10/100, PC104, Network Interface Card (daughtercard on Pentium) | ||
| Line 17: | Line 16: | ||
*TDA-104 Card | *TDA-104 Card | ||
*DT4070 Series Modem Card | *DT4070 Series Modem Card | ||
*COM4N Card | *COM4N Card<p>Specific card information and drawings may be found later in this section.</p> | ||
<p>Specific card information and drawings may be found later in this section.</p> | |||
=== P-Series (Pentium) APU-102 ===<p>The following cards are pre-installed inside the APU-102 card cage:</p> | |||
*LPM-TX Pentium Card | *LPM-TX Pentium Card | ||
*PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium) | *PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium) | ||
*TDA-104 Card | *TDA-104 Card | ||
*DT4070 Series Modem Card | *DT4070 Series Modem Card | ||
*COM4A Card | *COM4A Card<p>Specific card information and drawings may be found later in this section.</p> | ||
<p>Specific card information and drawings may be found later in this section.</p> | |||
=== E-Series (486) APU-102 ===<p>The following cards are pre-installed inside the APU-102 card cage:</p> | |||
*486 Card | *486 Card | ||
*TDA-104 Card | *TDA-104 Card | ||
*DT4070 Series Modem Card | *DT4070 Series Modem Card | ||
*COM4 or COM4A Card | *COM4 or COM4A Card | ||
*USSD Card | *USSD Card<p>Specific card information and drawings may be found later in this section.\</p> | ||
<p>Specific card information and drawings may be found later in this section.\</p> | == LX-800 Card Layout (Front) / L-Series APU == | ||
==== Card Layout ==== | ==== Card Layout ==== | ||
[[File:F12 LX-800 Card Layout Front L-Series APU.png|thumb|left|800px|]] | [[File:F12 LX-800 Card Layout Front L-Series APU.png|thumb|left|800px|]] | ||
<br> | <br> | ||
==== Jumper Settings ==== | |||
{| style="border-collapse: collapse; width: 122px; height: 56px;" border="1" cellpadding="2" | {| style="border-collapse: collapse; width: 122px; height: 56px;" border="1" cellpadding="2" | ||
|- style="height: 28px;" | |- style="height: 28px;" | ||
| style="width: 26.4688px; height: 28px;" | <p>J13</p> | | style="width: 26.4688px; height: 28px;" |<p>J13</p> | ||
| style="width: 84.5312px; height: 28px;" | <p>3-4?</p> | |||
| style="width: 84.5312px; height: 28px;" |<p>3-4?</p> | |||
|- style="height: 28px;" | |- style="height: 28px;" | ||
| style="width: 26.4688px; height: 28px;" | <p>J23</p> | | style="width: 26.4688px; height: 28px;" |<p>J23</p> | ||
| style="width: 84.5312px; height: 28px;" | <p>11-12</p> | |||
| style="width: 84.5312px; height: 28px;" |<p>11-12</p> | |||
|} | |} | ||
'''''' | '''''' | ||
'''NOTE:''' Onboard Battery jumper, J31, is shipped disabled and needs to be enabled before use (1-2). If external battery is used, the onboard battery needs to be disabled (OPEN). | '''NOTE:''' Onboard Battery jumper, J31, is shipped disabled and needs to be enabled before use (1-2). If external battery is used, the onboard battery needs to be disabled (OPEN). | ||
== LX-800 Card Layout (Back) / L-Series APU == | |||
==== Card Layout ==== | ==== Card Layout ==== | ||
[[File:F13 LX-800 Card Layout Back L-Series APU.png|thumb|left|800px]] | [[File:F13 LX-800 Card Layout Back L-Series APU.png|thumb|left|800px]] | ||
<br> | <br> | ||
==== Jumper Settings ==== | |||
<p>'''NOTE: '''All license stickers '''MUST''' be applied to be in compliance with all applicable software licenses.</p> | |||
== LPM-TX Pentium Card / P-Series and PN-Series APU == | |||
== LPM-TX Pentium Card / P-Series and PN-Series | |||
==== Layout ==== | ==== Layout ==== | ||
<span style="color: rgb(224, 62, 45);" >NOTE TO EDITORS: The image is not displayed in Word or PDF sources.</span> | <span style="color: rgb(224, 62, 45);">NOTE TO EDITORS: The image is not displayed in Word or PDF sources.</span> | ||
==== Jumper Configurations ==== | ==== Jumper Configurations ====<p>J8 OPEN</p><p>J9 OPEN</p><p>J10 OPEN</p><p>J11 1-2</p><p>J12 OPEN</p><p>J13 2-3</p><p>J14 2-3</p><p>J15 2-3</p><p>J19 1-4*</p><p> 2-15*</p><p> 3-12*</p><p> 5-6</p><p> 7-22*</p><p> 9-10</p><p> 11-14*</p><p> 17-24*</p><p>J20 1-2</p><p>J21 1-2</p><p>J22 2-3</p><p>J23 OPEN</p><p>J24 3-5</p><p> 4-6</p><p>*Wire wrap jumpers</p> | ||
<p>J8 OPEN</p><p>J9 OPEN</p><p>J10 OPEN</p><p>J11 1-2</p><p>J12 OPEN</p><p>J13 2-3</p><p>J14 2-3</p><p>J15 2-3</p><p>J19 1-4*</p><p> 2-15*</p><p> 3-12*</p><p> 5-6</p><p> 7-22*</p><p> 9-10</p><p> 11-14*</p><p> 17-24*</p><p>J20 1-2</p><p>J21 1-2</p><p>J22 2-3</p><p>J23 OPEN</p><p>J24 3-5</p><p> 4-6</p><p>*Wire wrap jumpers</p> | |||
SSD removed for clarity | SSD removed for clarity | ||
== PPM-10/100 Network Interface Card / PN-Series | == PPM-10/100 Network Interface Card / PN-Series APU == | ||
==== Layout ==== | ==== Layout ==== | ||
[[image:F15_PPM-10_100_Network_Interface_Card_PN-Sries APU.png|thumb|left|800px]] | [[image:F15_PPM-10_100_Network_Interface_Card_PN-Sries APU.png|thumb|left|800px]] | ||
<br> | <br> | ||
==== Jumper Configurations ==== | ==== Jumper Configurations ==== | ||
| Line 89: | Line 80: | ||
<br> | <br> | ||
==== Jumper Configurations ==== | ==== Jumper Configurations ==== | ||
| Line 97: | Line 86: | ||
JP10 1-2 | JP10 1-2 | ||
== PCM-SSD Card / P-Series and PN-Series | == PCM-SSD Card / P-Series and PN-Series APU == | ||
==== Layout ==== | ==== Layout ==== | ||
[[File:F17 PCM-SSD Card P-Series and PN-Series APU.png|thumb|left|800px]] | [[File:F17 PCM-SSD Card P-Series and PN-Series APU.png|thumb|left|800px]] | ||
<br> | <br> | ||
<p>8 | ==== Jumper Configurations ====<p>JP1 1-3</p><p> 2-4</p><p> 5-7</p><p> 9-10</p><p>JP2 1-2</p><p>JP3, JP5, JP7 configured as follows:</p><p>1-2</p><p>3-5</p><p>4-6</p><p>7-8</p><p>9-10</p><p>JP4, 6, 8 configured as follows:</p><p> 2-3</p><p>JP9 1-2</p><p>JP10 1-2</p><p>JP11 1-2</p><p> 3-4</p><p> 5-6</p><p> 7-8</p><p>JP12 1-2</p><p> 3-4</p><p> 5-6</p> | ||
== 486SLC Card Layout / E-Series APU == | |||
<span style="color: rgb(224, 62, 45);" >NOTE TO EDITORS: The image is not displayed in Word or PDF sources.</span><div><br></div><div>J1 OPEN</div><div>J2 OPEN</div><div>J3 1-3</div><div><span> </span>2-4</div><div><span> </span>7-9</div><div><span> </span>8-10</div><div><span> </span>13-15</div><div><span> </span>14-16</div><div>J4 1-2</div><div>J5 1-2</div><div>J6 OPEN</div><div>J7 OPEN</div><div>J8 OPEN</div><div>J9 OPEN</div><div>J10 OPEN</div><div>J11 1-2</div><div>J12 OPEN</div><div>J13 OPEN</div><div>J14 5-10*</div><div><span> </span>8-25*</div><div><span> </span>11-12</div><div><span> </span>13-14</div><div><span> </span>15-18*</div><div><span> </span>16-27*</div><div><span> </span>17-20*</div><div><span> </span>19-28*</div><div><span> </span>21-22</div><div><span> </span>23-24</div><div>J15 OPEN</div><div>J16 OPEN</div><div>J17 OPEN</div><div>J18 1-2</div><div>J19 OPEN</div><div>J20 2-3</div><div>J21 2-3</div><div>* Wire wrap jumpers</div><div><br></div><div><br></div> | |||
<p><br></p> | |||
<br> | <br> | ||
Revision as of 15:58, 9 October 2024
APU-102 Internal Components Specifications
Inside the Card Cage
=== L-Series (LX-800) APU-102 ===
The following cards are pre-installed inside the APU-102 card cage:
- LX-800 “Geode” Processor Card
- TDA-104 Card
- DT4070 Series Modem Card
- COM4N Card or LX-COM (Quad serial board-daughtercard on LX-800)
Specific card information and drawings may be found later in this section.
=== PN-Series (Pentium with network option) APU-102 ===
The following cards are pre-installed inside the APU-102 card cage:
- LPM-TX Pentium Card
- PPM-10/100, PC104, Network Interface Card (daughtercard on Pentium)
- PCM-CFLASH2, PC104 Compact Flash Adapter (daughtercard on Pentium)
- PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
- TDA-104 Card
- DT4070 Series Modem Card
- COM4N Card
Specific card information and drawings may be found later in this section.
=== P-Series (Pentium) APU-102 ===
The following cards are pre-installed inside the APU-102 card cage:
- LPM-TX Pentium Card
- PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
- TDA-104 Card
- DT4070 Series Modem Card
- COM4A Card
Specific card information and drawings may be found later in this section.
=== E-Series (486) APU-102 ===
The following cards are pre-installed inside the APU-102 card cage:
- 486 Card
- TDA-104 Card
- DT4070 Series Modem Card
- COM4 or COM4A Card
- USSD Card
Specific card information and drawings may be found later in this section.\
LX-800 Card Layout (Front) / L-Series APU
Card Layout
Jumper Settings
J13 |
3-4? |
J23 |
11-12 |
'
NOTE: Onboard Battery jumper, J31, is shipped disabled and needs to be enabled before use (1-2). If external battery is used, the onboard battery needs to be disabled (OPEN).
LX-800 Card Layout (Back) / L-Series APU
Card Layout
Jumper Settings
NOTE: All license stickers MUST be applied to be in compliance with all applicable software licenses.
LPM-TX Pentium Card / P-Series and PN-Series APU
Layout
NOTE TO EDITORS: The image is not displayed in Word or PDF sources.
==== Jumper Configurations ====
J8 OPEN
J9 OPEN
J10 OPEN
J11 1-2
J12 OPEN
J13 2-3
J14 2-3
J15 2-3
J19 1-4*
2-15*
3-12*
5-6
7-22*
9-10
11-14*
17-24*
J20 1-2
J21 1-2
J22 2-3
J23 OPEN
J24 3-5
4-6
*Wire wrap jumpers
SSD removed for clarity
PPM-10/100 Network Interface Card / PN-Series APU
Layout
Jumper Configurations
JP5 1-2
3-4
PCM-CFLASH2 PC104 Compact Flash Adapter / PN-Series APU
Layout
![thumb]left](/index.php/File:F16_PCM-CFLASH2_PC104_Compact_Flash_Adapter_PN-Series_APU.png)
Jumper Configurations
JP5 2-3
JP10 1-2
PCM-SSD Card / P-Series and PN-Series APU
Layout
==== Jumper Configurations ====
JP1 1-3
2-4
5-7
9-10
JP2 1-2
JP3, JP5, JP7 configured as follows:
1-2
3-5
4-6
7-8
9-10
JP4, 6, 8 configured as follows:
2-3
JP9 1-2
JP10 1-2
JP11 1-2
3-4
5-6
7-8
JP12 1-2
3-4
5-6
486SLC Card Layout / E-Series APU
NOTE TO EDITORS: The image is not displayed in Word or PDF sources.
J1 OPEN
J2 OPEN
J3 1-3
2-4
7-9
8-10
13-15
14-16
J4 1-2
J5 1-2
J6 OPEN
J7 OPEN
J8 OPEN
J9 OPEN
J10 OPEN
J11 1-2
J12 OPEN
J13 OPEN
J14 5-10*
8-25*
11-12
13-14
15-18*
16-27*
17-20*
19-28*
21-22
23-24
J15 OPEN
J16 OPEN
J17 OPEN
J18 1-2
J19 OPEN
J20 2-3
J21 2-3
* Wire wrap jumpers