Appendix F - Specifications

APU-102 Internal Components Specifications

Inside the Card Cage

L-Series (LX-800) APU-102

The following cards are pre-installed inside the APU-102 card cage:

• LX-800 “Geode” Processor Card
• TDA-104 Card
• DT4070 Series Modem Card
• COM4N Card or LX-COM (Quad serial board-daughtercard on LX-800)

Specific card information and drawings may be found later in this section.

PN-Series (Pentium with network option) APU-102

The following cards are pre-installed inside the APU-102 card cage:

• LPM-TX Pentium Card
• PPM-10/100, PC104, Network Interface Card (daughtercard on Pentium)
• PCM-CFLASH2, PC104 Compact Flash Adapter (daughtercard on Pentium)
• PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
• TDA-104 Card
• DT4070 Series Modem Card
• COM4N Card

Specific card information and drawings may be found later in this section.

P-Series (Pentium) APU-102

The following cards are pre-installed inside the APU-102 card cage:

• LPM-TX Pentium Card
• PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
• TDA-104 Card
• DT4070 Series Modem Card
• COM4A Card

Specific card information and drawings may be found later in this section.

E-Series (486) APU-102

The following cards are pre-installed inside the APU-102 card cage:

• 486 Card
• TDA-104 Card
• DT4070 Series Modem Card
• COM4 or COM4A Card
• USSD Card

Specific card information and drawings may be found later in this section.\

LX-800 Card Layout (Front) / L-Series APU

Card Layout

Jumper Settings

J13	3-4?
J23	11-12

'

NOTE: Onboard Battery jumper, J31, is shipped disabled and needs to be enabled before use (1-2). If external battery is used, the onboard battery needs to be disabled (OPEN). 

LX-800 Card Layout (Back) / L-Series APU

Card Layout

Jumper Settings

NOTE: All license stickers MUST be applied to be in compliance with all applicable software licenses.

LPM-TX Pentium Card / P-Series and PN-Series APU 

Layout

NOTE TO EDITORS: The image is not displayed in Word or PDF sources.

Jumper Configurations

J8   OPEN

J9   OPEN

J10  OPEN

J11  1-2

J12  OPEN

J13  2-3

J14  2-3

J15  2-3

J19  1-4*

        2-15*

        3-12*

        5-6

        7-22*

        9-10

        11-14*

        17-24*

J20   1-2

J21   1-2

J22   2-3

J23  OPEN

J24   3-5

         4-6

*Wire wrap jumpers

SSD removed for clarity

PPM-10/100 Network Interface Card / PN-Series APU 

Layout

Jumper Configurations

JP5  1-2
         3-4

PCM-CFLASH2 PC104 Compact Flash Adapter / PN-Series APU

Layout

Jumper Configurations

JP5    2-3

JP10  1-2

PCM-SSD Card / P-Series and PN-Series APU 

Layout

Jumper Configurations

JP1      1-3

            2-4

            5-7

            9-10

JP2      1-2

JP3, JP5, JP7 configured as follows:

1-2

3-5

4-6

7-8

9-10

JP4, 6, 8 configured as follows:

             2-3

JP9      1-2

JP10     1-2

JP11     1-2

            3-4

            5-6

            7-8

JP12    1-2

            3-4

            5-6

8  486SLC Card Layout / E-Series APU