Appendix F - Specifications: Difference between revisions
OldAshanks (talk | contribs) Initial page creation |
OldAshanks (talk | contribs) m Ashanks moved page Specifications to Appendix F - Specifications |
(No difference)
| |
Revision as of 19:19, 8 October 2024
APU-102 Internal Components Specifications
Inside the Card Cage
L-Series (LX-800) APU-102
The following cards are pre-installed inside the APU-102 card cage:
- LX-800 “Geode” Processor Card
- TDA-104 Card
- DT4070 Series Modem Card
- COM4N Card or LX-COM (Quad serial board-daughtercard on LX-800)
Specific card information and drawings may be found later in this section.
PN-Series (Pentium with network option) APU-102
The following cards are pre-installed inside the APU-102 card cage:
- LPM-TX Pentium Card
- PPM-10/100, PC104, Network Interface Card (daughtercard on Pentium)
- PCM-CFLASH2, PC104 Compact Flash Adapter (daughtercard on Pentium)
- PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
- TDA-104 Card
- DT4070 Series Modem Card
- COM4N Card
Specific card information and drawings may be found later in this section.
P-Series (Pentium) APU-102
The following cards are pre-installed inside the APU-102 card cage:
- LPM-TX Pentium Card
- PCM-SSD Card, PC104 Solid State Disk (daughtercard on Pentium)
- TDA-104 Card
- DT4070 Series Modem Card
- COM4A Card
Specific card information and drawings may be found later in this section.
E-Series (486) APU-102
The following cards are pre-installed inside the APU-102 card cage:
- 486 Card
- TDA-104 Card
- DT4070 Series Modem Card
- COM4 or COM4A Card
- USSD Card
Specific card information and drawings may be found later in this section.