LX-800 to T10 Upgrade Procedure: Revision history

10 February 2025

• curprev 17:1517:15, 10 February 2025 GMalcom talk contribs m 6,191 bytes −6 →Save Parameters From the LX-800 ★
• curprev 17:1517:15, 10 February 2025 GMalcom talk contribs m 6,197 bytes −6 →Remove the LX-800 and Install T10
• curprev 17:1517:15, 10 February 2025 GMalcom talk contribs m 6,203 bytes −5 →Install parameters on T10

17 January 2025

• curprev 18:3818:38, 17 January 2025 GMalcom talk contribs m 6,208 bytes +4 →Remove the LX-800 and Install T10

10 January 2025

• curprev 20:4120:41, 10 January 2025 GMalcom talk contribs 6,204 bytes +204 →Verifying Changes
• curprev 20:3320:33, 10 January 2025 GMalcom talk contribs 6,000 bytes −34 →Verifying Changes
• curprev 19:2019:20, 10 January 2025 GMalcom talk contribs 6,034 bytes +1,245 →Functionality Test
• curprev 14:3614:36, 10 January 2025 GMalcom talk contribs m 4,789 bytes +1 →Remove the LX-800 and Install T10

9 January 2025

• curprev 19:2819:28, 9 January 2025 GMalcom talk contribs 4,788 bytes +4,788 Created page with "<p>The T10 is a small, high-performance, embedded computer system on a single STD-Bus board. It integrates several popular I/O options including six serial ports, digital I/O, M.2 SSD storage, USB, display port and network. The T10 is based upon an Intel Atom E900 (Apollo Lake-1) processor, supporting up to 8 GB LPDDR4 2400 MT/s system memory.</p> The T10 is designed to replace the LX-800 in the STD bus cage of our APU-102. The document herein describes the procedure of..."