View source for LXCOM Upgrade Battery Notice

{| style="border-collapse: collapse; width: 70%; margin-left: auto; margin-right: auto;" border="1px" cellpadding="2px" 
|-
| style="width: 13.8955%; background-color: rgb(224, 62, 45);" | <p style="text-align: center;" >'''ATTENTION!'''</p>
| style="width: 78.8598%;" | <p>The on-board CMOS battery on the LX800 '''MUST''' be disabled before connecting the external battery. Leaving the on-board CMOS battery enabled can cause catastrophic failure with the external battery connected.</p>

Disable the on-board CMOS battery by removing the jumper on J31. Leave the jumper installed on pin 1 only so it will be available for future use.
|}
[[image:img1741377140650.png|700px|center|frameless]]

[[Category:Procedures]]