Jump to content

View source for COM4N to COM4 Reversion Procedure

← COM4N to COM4 Reversion Procedure

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

If it is necessary to revert from the network option back to standard (non-network), the COM4N must be converted back to standard as well. The network option required shared interrupts and standard uses unique interrupts for each port. The non-network version of the hardware will not operate with shared interrupts.&nbsp;

Return to COM4N to COM4 Reversion Procedure.

Retrieved from "https://docdepot.railrsm.com/index.php/COM4N_to_COM4_Reversion_Procedure"